PHOTOBIO X White Cable Harness, 18AWG locking 277V, L7-15P, 10ft Hanna Instruments Initial output is 140

Initial output is 140

17mm Techline insert: Presses onto standard 17mm dripline

including rockwool

*Multi-Tier rooms will require additional units for the increased canopy

Typically two to four months in use

PHOTOBIO X White Cable Harness, 18AWG locking 277V, L7-15P, 10ft Hanna Instruments Initial output is 140L7 15P locking power cord for commercial LED layouts The PHOTOBIO X 277V harness routes a stable 277 volt feed to LED fixtures across a 10 foot run. Its locking connector and 18AWG conductors hold load on tight commercial racks. An IP rated mini connector resists dust and humidity inside active flowering rooms. The white UV resistant jacket adds usable canopy reflectance instead of disappearing into a dark corner. The lock pulls weight off the breaker